Product Description
Hoist Head Sheave/Hoist Sheave Pulley/Mine Hoist Xihu (West Lake) Dis. Pulley
Product Introduction:
Xihu (West Lake) Dis. wheel device can transport the whole under the premise of swimming round and fixed wheel adopts integral cast joint structure, wheel hub, wheel rim for cast steel materials, spoke for the channel steel, after welding the whole annealing process again.
Considering the replacement bearing maintenance convenient, leave replace bearing remove space, guide wheel device structure adopted eccentric layout.
Xihu (West Lake) Dis. shaft using middle carbon alloy steel forging whole, adopting the structure of the cast joint pulley, equipped with PVC or nylon liner, protect the wire rope.
Imported or domestic spherical roller bearings, also can install bearing temperature measuring element.
In order to prolong the service life of wire rope, rim inside wedge liner with wear-resisting, withstand voltage, using D660 (1571) or nylon liner.
1) eccentric layout: on 1 side of a winding wheel have replaced bearing dismantling space, can not remove the pulley mechanism, only for bearing maintenance and replacement.
2) symmetry layout: relative with 4 wheels on both sides of the 2 bearing seat is symmetrical, but need to replace the bearing shell, only to remove the pulley mechanism.
sheave pulley and the common malfunction and technical guide wheel
1) to the problem of old structure pulley sliding bearing to burn tile should improve lubrication way; Because of the pulley is installed on the derrick, daily maintenance inconvenience, should add temperature alarm device, so as to timely maintenance to prevent the tile burning failure, or the original sliding bearing replacement into rolling bearing structure
2) for old structure pulley rope groove without liner, can no longer add padding on the original rope groove, need to change a gasketed pulley, adjacent assembly size can remain motionless, and installation
3) for mountain transportation difficulties or have some difficulties in roadway transportation in underground mine, the pulley is (guide wheel) change the structure into 2 or 4 and a half of head sheave.
Mine hoist sheave specification:
| Material | Q235B,Q345B,35#,45# |
| Heat treatment | Hardening and tempering, high frequency quenching, carburizing quenching and so on |
| Groove surface quench | HRC45-55 |
| Groove surface quench depth | ≥2mm |
| Processing diameter scope | 1600~5000mm |
Our services:
1>.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2>.Sale services: servant
Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
3>.After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
Supplying technique, building design, instruction, installation and debugging for free.
4>.We provide one-year warranty to make sure your machine runs consistently
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in 2 years.
About us
CITICHL is national major industry and heavy machinery manufacturing base in the middle of china, we can supply the customers with important complete technical equipments in mining, non-ferrous metal, chemical industry, metallurgy, construction materials, environment protection, and power generating as well as other basic industries. Our products are sold well to countries and regions in Asia, Africa, Europe, and Australia, and hold a large market share home and abroad.
We also supply all kinds of crushing equipments, vibrating feeder, vibrating screen, rod mil, stone washer, belt conveyor, screw classifier, flotation machine, magnetic ore separator, shaving table, spiral chute, rotary kiln, rotary dryer, mine hoist , ect. If you have any interest in our products, pls kindly contact us by the upper information with no hesitation.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Electric Winch |
|---|---|
| Driven Type: | AC |
| Speed: | Fast |
| Carrying Capacity: | Weight Level |
| Tonnage: | 10T |
| Reel Number: | 1/2 |
| Customization: |
Available
| Customized Request |
|---|
How are sheave pulleys adapted for specialized applications in construction and engineering?
Sheave pulleys are versatile components that can be adapted for specialized applications in construction and engineering. Here is a detailed explanation of how sheave pulleys are adapted for specialized applications:
1. Customized Designs: Sheave pulleys can be custom-designed to meet specific requirements in construction and engineering projects. This includes considerations such as load capacity, environmental conditions, space limitations, and integration with other equipment or systems.
2. Material Selection: Depending on the application, sheave pulleys can be constructed from various materials such as steel, cast iron, aluminum, or specialized alloys. The choice of material depends on factors such as strength, durability, corrosion resistance, and weight restrictions.
3. Special Coatings and Treatments: In certain applications where environmental factors or specific performance requirements are present, sheave pulleys can be coated or treated with specialized materials. This may include corrosion-resistant coatings, high-temperature coatings, or anti-friction treatments to enhance performance and longevity.
4. Size and Configuration: Sheave pulleys can be manufactured in a wide range of sizes and configurations to accommodate different load capacities and operational requirements. This allows for flexibility in adapting sheave pulleys to specific construction and engineering applications.
5. Specialized Attachments: Depending on the application, sheave pulleys can be equipped with specialized attachments or features. For example, in crane and hoist applications, pulleys may have integrated load sensing mechanisms, anti-slip surfaces, or quick-release mechanisms for efficient load handling.
6. Integration with Control Systems: Sheave pulleys can be integrated into complex control systems and automation technologies used in construction and engineering. This allows for precise load control, safety features, and remote monitoring capabilities.
7. Specialized Bearing Systems: In demanding applications, sheave pulleys may incorporate specialized bearing systems to ensure smooth rotation, reduce friction, and handle heavy loads. This can include sealed or lubricated bearings, precision bearings, or self-aligning bearings.
8. Advanced Safety Features: Specialized sheave pulleys may include additional safety features such as overload protection, emergency stop mechanisms, or fail-safe systems. These features enhance the safety of construction and engineering operations, particularly in critical or high-risk environments.
9. Compliance with Standards: Sheave pulleys adapted for specialized applications in construction and engineering often comply with industry standards and regulations. This ensures that they meet the necessary safety and performance requirements for their intended use.
By adapting sheave pulleys for specialized applications, construction and engineering projects can benefit from enhanced efficiency, improved safety, and optimized performance. It is important to consult with experts and manufacturers experienced in specialized applications to ensure the proper selection and adaptation of sheave pulleys for specific project requirements.
What safety considerations should be kept in mind when using sheave pulleys?
When using sheave pulleys, it is important to prioritize safety to prevent accidents and ensure the well-being of individuals involved. Here are several safety considerations that should be kept in mind:
1. Proper Installation: Ensure that sheave pulleys are installed correctly according to the manufacturer’s guidelines and industry standards. Improper installation can lead to pulley misalignment, belt or chain slippage, or premature failure, posing safety hazards. Follow the recommended procedures for pulley alignment, tensioning, and securing to maintain safe operation.
2. Regular Inspections: Perform regular inspections of sheave pulleys to identify any signs of wear, damage, or misalignment. Inspect the pulley grooves, cables, belts, or chains for signs of fraying, cracking, or stretching. Any abnormalities should be addressed promptly to prevent accidents and ensure the reliable operation of the system.
3. Guarding: Install appropriate guards or protective enclosures around sheave pulleys to prevent accidental contact with moving parts. These guards should be designed to prevent fingers, clothing, or other objects from getting caught in the pulley or belt/chain. Adequate guarding reduces the risk of entanglement, pinch points, or other potential hazards.
4. Lockout/Tagout Procedures: When performing maintenance or repair work on machinery or equipment with sheave pulleys, follow proper lockout/tagout procedures. Lockout/tagout procedures involve isolating the power source, de-energizing the system, and securing it with locks or tags to prevent accidental startup. This ensures the safety of personnel working on or near the sheave pulleys.
5. Load Capacity: Ensure that the sheave pulleys are not overloaded beyond their specified load capacity. Exceeding the load capacity can lead to pulley failure, belt or chain breakage, or sudden release of tension, which can cause severe injuries or damage. Refer to manufacturer guidelines and engineering calculations to determine the appropriate load capacity for the specific application.
6. Proper Training: Provide adequate training to personnel who operate or work around machinery or equipment with sheave pulleys. Training should cover safe operating procedures, hazard identification, emergency response protocols, and the proper use of personal protective equipment (PPE) such as gloves, goggles, or safety vests. Well-trained personnel are better equipped to handle potential risks and ensure safe practices.
7. Maintenance and Lubrication: Regularly maintain and lubricate sheave pulleys as per manufacturer recommendations. Proper maintenance includes cleaning debris, inspecting for wear or damage, and applying appropriate lubrication to reduce friction and ensure smooth operation. Neglecting maintenance can lead to pulley malfunction, decreased performance, and increased safety risks.
8. Environmental Factors: Consider environmental factors when using sheave pulleys. For example, in outdoor applications, protect the pulleys from exposure to moisture, extreme temperatures, or corrosive substances that could compromise their integrity. Adhere to relevant safety standards and guidelines specific to the environment in which the sheave pulleys are utilized.
9. Emergency Stop: Ensure that machinery or equipment with sheave pulleys is equipped with an easily accessible emergency stop mechanism. This allows for quick and immediate shutdown of the system in case of emergencies, preventing further hazards or injuries.
10. Regulatory Compliance: Adhere to local occupational health and safety regulations and standards applicable to the use of sheave pulleys. Stay up-to-date with safety guidelines and best practices to ensure compliance and create a safe working environment.
By considering these safety considerations when using sheave pulleys, you can minimize the risk of accidents, protect personnel, and maintain the integrity and efficiency of the system.
In which industries are sheave pulleys commonly employed?
Sheave pulleys find widespread use in numerous industries where lifting, power transmission, or cable-based systems are essential. Here is a detailed explanation of the industries in which sheave pulleys are commonly employed:
- Construction and Building: Sheave pulleys are extensively used in the construction and building industry. They play a vital role in lifting heavy materials and equipment, such as concrete buckets, scaffolding, and cranes. Sheave pulleys are employed in applications like material hoisting, cable-supported platforms, and elevator systems.
- Maritime and Shipping: The maritime and shipping industry relies on sheave pulleys for various operations. They are used in shipyards for lifting and lowering heavy loads, launching and retrieving boats, and maneuvering cargo. Sheave pulleys are utilized in ship cranes, winches, davits, and other maritime equipment.
- Mining and Quarrying: In the mining and quarrying industry, sheave pulleys are crucial for material extraction and transportation. They are employed in conveyor systems, hoists, and winches to move bulk materials, ores, and minerals. Sheave pulleys enable efficient and reliable handling of heavy loads in mining and quarry operations.
- Oil and Gas: Sheave pulleys are commonly found in the oil and gas industry, particularly in drilling and production operations. They are used in drilling rigs, wellhead equipment, and offshore platforms for lifting and lowering equipment, running cables, and supporting various machinery and components.
- Manufacturing and Industrial: Sheave pulleys play a vital role in manufacturing and industrial settings. They are used in conveyor systems, assembly lines, and material handling equipment to move products, components, and raw materials. Sheave pulleys enable efficient power transmission, motion control, and positioning in various manufacturing processes.
- Agriculture and Farming: In the agriculture and farming industry, sheave pulleys are employed in equipment such as grain elevators, hay balers, and irrigation systems. They facilitate the movement of crops, feed, and agricultural machinery, enhancing productivity and efficiency in farming operations.
- Utilities and Power Generation: Sheave pulleys are utilized in utilities and power generation facilities. They are used in systems such as overhead power lines, cable cars, and cranes for lifting heavy electrical equipment, transmission cables, and maintenance tools. Sheave pulleys enable safe and reliable operations in the utilities and power generation sector.
- Entertainment and Amusement: In the entertainment and amusement industry, sheave pulleys are employed in various applications. They are used in stage rigging, theatrical productions, theme park rides, and aerial acrobatics equipment. Sheave pulleys enable controlled movement, lifting, and positioning in entertainment and amusement settings.
- Transportation and Logistics: Sheave pulleys are utilized in transportation and logistics for cargo handling and material transportation. They are employed in cranes, overhead gantry systems, and conveyor belts at ports, warehouses, airports, and distribution centers. Sheave pulleys facilitate efficient movement and transfer of goods in the transportation and logistics industry.
- Automotive and Vehicle Manufacturing: Sheave pulleys are commonly employed in the automotive and vehicle manufacturing industry. They are used in engine systems, powertrain components, and accessory drives. Sheave pulleys enable efficient power transmission to various vehicle systems, such as alternators, water pumps, and air conditioning compressors.
These are just a few examples of the industries where sheave pulleys are commonly employed. Due to their versatility, sheave pulleys can be found in many other sectors that require lifting, cable-based systems, or power transmission, contributing to the smooth and efficient operation of various mechanical systems.
editor by CX
2024-01-09